Before Switching Off The Power; Troubleshooting Guide; Numark - The Proven Leader In Dj Technology - Numark CDN24 Operating Manual

CDN-24

BEFORE SWITCHING OFF THE POWER:

When you have finished using the CD player, be sure that the disc tray is closed with the "OPEN/CLOSE" button before
switching off the power .
D O N O T switch off the power when
the disc holder is open.

Troubleshooting Guide

Symptom
The power fails to switch on when the
POWER switch is set to on
Disc play does not start
No sound
Sound skips
Programmed disc play will not function
Hum
©1998 Numark Industries
Possible Cause
Poor power plug connection at the AC
outlet
The disc is loaded upside down
The disc is too dirty
Improper output cable connections
Improper amplifier operation
The CD player is subject to vibrations
or physical shock
The disc is too dirty
The CD player is in normal disk play
mode
Loose cable connections

Numark - The Proven Leader in DJ Technology

Switch off the power after the
disc holder has been closed
with the "OPEN/CLOSE" button
Insert the power plug firmly into the AC
outlet
Reload the disc with the label side up
Clean the disc
Connect the output cables correctly
Check amplifier setup
Change the installation location
Clean the disc
Hold down the Program button for 3
seconds then program the tracks
Firmly connect all audio plugs
14
Corrective Action
http://www.numark.com