Operation; Turn On And Off; Basic Operation - NorthStar NS3100 Multi Instrument Reference Manual

2 Operation

2-1 Turn on and off

2-2 Basic operation

Backlight Level 2
Reference Manual and Installation Manual
Turn the unit on and off with the auxiliary power
switch on the boat. The unit does not have its own
power switch. When you turn it off, any settings you
have made are retained.
If the word SIM flashes at the bottom, right of the
display, then the unit is in simulate mode (see section
2-5).
The keys
The unit has four keys, labelled
this manual:
Press means to push the key for less than one
second.
Hold for two seconds means to hold the key down
for two seconds or more.
Press one key + another key means to push both
keys together.
Set backlight level for screen and keys
You can set the backlight to one of four brightness
levels or off. Press once to display the current
backlight level, press again to change the level:
Change the items displayed
and . In The display can show two values at once, one in the
top part of the screen and one in the bottom. If an
item displays as dashes (— —) then it means that the
value is outside the range, for example the depth
might be too deep or unknown.
To change what is displayed in the top part of the
screen, press
Speed.
Avg speed.
Max speed.
Trim speed.
Depth.
Temperature.
To change the value displayed in the bottom part of
the screen, press
Speed.
Depth.
Trip log (distance).
Total log (distance).
Battery voltage.
Countdown timer.
one or more times to select:
one or more times to select:
5