9 NS3100 Multi hardware
9-1 What comes with your NS3100 Multi
9-2 Other parts required
Reference Manual and Installation Manual
The NS3100 Multi comes in several configurations.
Standalone configuration
NS3100 Multi unit with protective cover.
Warranty card.
Mounting template.
This Installation and Operation Manual.
In addition, the standalone configuration usually
requires a depth transducer and a speed/
temperature transducer (see section 9-3).
One or more 3100 series instruments will be
connected to the boat 12 V power supply via:
An accessory switch to turn the instruments on
and off.
A fuse. Use a 1 A fuse for between one and five
instruments.
Kit configuration
The NS3100 Multi is available in several kit
configurations with different grades of through hull
transducer, with:
The parts for the standalone configuration, listed
above.
Through hull depth transducer.
Through hull speed/temperature transducer.
Transducer Installation Manual.
Optional external beepers or lights can be fitted.
The NS3100 Multi output is switched to ground, 30 V
DC and 250 mA maximum. If the beepers and lights
require more than 250 mA, fit a relay.
For systems of several instruments, wiring and
connectors are required (see section 8 or your
NavBus Installation and Operation Manual).
17