Temperature; Set Temperature Units; Calibrate Temperature - NorthStar NS3100 Multi Instrument Reference Manual

6 Temperature

6-1 Set temperature units

6-2 Calibrate temperature

Water temperature
14
Temperature is measured by a sensor in the speed transducer.
The units can be either °C or °F:
Press until the temperature is displayed, then
hold until the units change.
The unit is factory calibrated and should not
normally need calibrating. To calibrate:
1 Measure the water temperature near the speed
transducer.
2 Press + several times until the Temperature
Calibration screen is displayed.
3 Press or to change the temperature to the
value measured in step 1 above.
4 Press .
Northstar NS3100 MULTI