Table of Contents
Advertisement
Available languages
Available languages
Monitor Power Connection
1. Make sure the monitor is fixed in place and cannot fall down.
Insert the 12/24 Volt DC plug of the power cable into the
power jack (13) at the right side of the monitor.
2. Plug the 12/24 Volt cigarette lighter adaptor into the vehicle's
cigarette lighter socket.
3. Press the ON/OFF button (3) to turn the display ON. The blue
LED (6) will light up to indicate the monitor is ON. If no ad-
justments are made, the monitor will turn to standby mode.
Camera Installation
1. Mount the camera on the license
plate. If necessary, loosen the
license plate first.
2. Mount the camera on the centre of
the license plate. Remove the
protection foil from the adhesive
surface. Make sure the arrows on
the camera are facing up while
mounting the camera on the license
plate.
The camera head can be moved up
and down, according to application
(please note that you have to use a
little force to lift up or tilt the camera
head).
The six provided infrared LEDs will
light up automatically in the dark.
This will ensure clear view.
Operation
27
Photo Sensor
Infrared LEDs
Advertisement
Table of Contents
