Table of Contents
Advertisement
Quick Links
Operator Manual
NR810 Rider Scrubber
WARNING
Do not use the pallet truck before reading and
understanding these operating instructions.
NOTE:
• Please check the designation of your
present type at the last page of this
document as well as on the ID-plate.
• Keep this manual for future reference.
Version 03/2022
NR810-SMS-001-EN
Advertisement
Table of Contents
Related Manuals for Noblelift NR810
Summary of Contents for Noblelift NR810
- Page 1 Operator Manual NR810 Rider Scrubber WARNING Do not use the pallet truck before reading and understanding these operating instructions. NOTE: • Please check the designation of your present type at the last page of this document as well as on the ID-plate.
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ............................3 MANUAL PURPOSE AND CONTENT ....................3 HOW TO KEEP THIS MANUAL ......................3 DECLARATION OF CONFORMITY ....................... 3 ACCESSORIES AND MAINTENANCE ....................3 CHANGE AND IMPROVEMENT ......................4 INTENDED USE ............................. 4 MACHINE IDENTIFICATION ........................4 TRANSPORT AND UNCRATING ...................... - Page 3 WORKING DATA ACCESS ........................19 TROUBLE SHOOTING ..........................20 LCD DISPLAY FAULT CODE ....................... 21 SCRAPPING AND DISPOSING....................... 22...
-
Page 4: Introduction
INTRODUCTION NOTE The code of related components in ( ) can be found in the chapter of machine description. MANUAL PURPOSE AND CONTENT ⚫ This manual is to provide the operator with the necessary information for the correct and safe use of the machine, which includes the technical data, safety, operation, storage, maintenance, accessories and dispose of the machine. -
Page 5: Change And Improvement
CHANGE AND IMPROVEMENT ⚫ Our company is committed to the continuous improvement of the products and reserves the right to notify the improvements and changes of the products that have been sold. INTENDED USE ⚫ This scrubber can be used in commercial and industrial environments, and it is suitable for cleaning smooth and hard floors (washing and sewage collecting). -
Page 6: Safety
SAFETY ⚫ The following symbols indicate potential dangers. In any case, please read this information carefully and take necessary precautions to avoid possible injury and property loss. VISIBLE SYMBOLS ON THE MACHINE WARNING! Read all the instructions carefully before performing any operation on the machine. - Page 7 ⚫ Do not work under the lifted machine without supporting it with safety stands. x When using lead (WET) batteries, they may emit inflammable gas under normal use, must keep sparks, flames, smoking materials and radiating, illuminating and burning items away from the batteries.
- Page 8 ⚫ Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously. ⚫ Pay attention during machine transportation when temperature is below freezing point. The water in the recovery tank and in the hoses could freeze and cause seriously damage to the machine. ⚫...
-
Page 9: Machine Description
MACHINE DESCRIPTION MAIN COMPONENTS Figure 1 Steering wheel 11. Solution tank water inlet Seat cushion 12. Solution tank water level indicator Recovery tank lid 13. Empty water indicator Recovery tank 14. Solution tank water filling hose Controller box & charging socket 15. -
Page 10: Control Panel Function Description (As Shown In Figure 2)
CONTROL PANEL FUNCTION DESCRIPTION (as shown in Figure 2) Figure 2 Description Function LCD display Display the functional status of the machine. Short press the button, the brush disk push rod drops and the brush Brush motor button motor works. Long press the button, perform automatic brush loading. -
Page 11: Technical Data
TECHNICAL DATA Model NR810 Rated power 1910 Brush motor rated power 380*2 Drive motor rated power Vacuum motor rated power Vacuum capacity >15.5 Voltage (DC) Sound pressure level dB (A) 68±3 Max. speed km/h Dimensions (L*W*H) 1415*890*1120 Brush speed 180-200... -
Page 12: Circuit Diagram
CIRCUIT DIAGRAM... -
Page 13: Operation Instructions
OPERATION INSTRUCTIONS WARNING! If the battery is installed or wired incorrectly, the electrical components of the machine may be seriously damaged. The battery must be installed by qualified personnel. Equip the machine with correct charger according to the battery. Please check if the battery is damaged before assembling. Disconnect the battery connector and charger plug. -
Page 14: Attaching Squeegee Assembly
CAUTION Before manually installing or uninstalling the brush disc or pad driver, ensure that all switches of the machine are off. Protective gloves must be worn during operation to avoid injury by debris. NOTE The machine uses the magnetic clamp for holding the brush disc/ pad driver. -
Page 15: Start And Stop Of Machine
NOTE When the float ball exceeds "F" position, excess water will be spilled from the top of the water level indicator pipe. Avoid the float ball exceeding "F" position when filling water. WARNING Use only low-foam and non-flammable detergent, which should be applicable to the scrubber. -
Page 16: Draining Tanks
CAUTION! To avoid any damage to the floor surface, turn off the brush/pad driver when the machine stops in an area. CAUTION! Do not use the machine when the battery charge is low, to avoid damaging the batteries and reducing the battery life. DRAINING TANKS 1. -
Page 17: Maintenance
are loose, and check for visible damage and leakage. MAINTENANCE WARNING! The procedures must be carried out after the machine is turned off and the battery charging cable is disconnected. Moreover, carefully read the instructions of Safety Chapter in this manual before performing any maintenance procedures. -
Page 18: Cleaning The Disk Brush/ Pad
after every use. CAUTION Keep the battery fully charged to extend the service life of the battery. CAUTION Charge the battery as soon as possible when the battery is low, otherwise the service life of the battery will be reduced. Check the battery charge at least once a week. -
Page 19: Checking And Replacing The Squeegee Blade
It is advisable to wear protective gloves when cleaning the squeegee in case of the injury caused by the sharp debris. 1. Loosen the knobs on the squeegee assembly and remove the vacuum hose from the squeegee. 2. Clean the aluminum squeegee bracket and the vacuum hose. Check the front blade and the rear blade for integrity, cuts and tears;... -
Page 20: Working Data Access
WORKING DATA ACCESS Long press the "front lamp button" to enter the LCD interface, working data of the machine can be read. There are four interfaces in total. LCD Display Description Energy saving mode: 0 for off, 1 for on Brush deck push rod motor state, 1-3 is down, 4-6 is up. -
Page 21: Trouble Shooting
TROUBLE SHOOTING Trouble Possible Cause Remedy The machine doesn't work Battery connector is disconnected Connect the battery connector and the LCD display doesn't Battery is completely discharged Charge the battery light up The machine doesn't work, Low battery Charge the battery and the battery charge is displayed at 10% Control circuit board failure... -
Page 22: Lcd Display Fault Code
LCD DISPLAY FAULT CODE Fault Code Possible Cause Remedy Power-on-off interval is too After shutting down, wait 3 seconds before turning Keyoff longer short the machine on 1. Charge the battery. Low battery Low voltage 2. Check the voltage detection circuit of the controller. -
Page 23: Scrapping And Disposing
Electromagnetic brake open Check the electromagnetic brake position and coil Brake open circuit resistance. Solution tank is empty Fill the solution tank before working Solution Tank E Recovery tank is full Empty the recovery tank before working Recovery Tank F No LCD display LCD display is broken.