Related Manuals for Challenger MT745D
Summary of Contents for Challenger MT745D
- Page 1 Operator Manual MT745D / MT755D / MT765D Rubber Track Tractor - CE S/N: EFF...Dxxx1001...
- Page 2 TO OUR CUSTOMER: ® Congratulations on your selection of a Challenger Product. We believe you have exercised excellent judgment in the purchase of your Challenger ® machine. We are most appreciative of your patronage. Your Dealer has performed the pre-delivery service on your new machine.
- Page 3 CONTENTS CHALLENGER ® MT745D / MT755D / MT765D 547095D1 C Rev CONTENTS SAFETY ................................A-1 GENERAL INFORMATION ..........................B-1 OPERATION ..............................C-1 ADJUSTMENTS ..............................D-1 LUBRICATION AND MAINTENANCE ....................... E-1 TROUBLESHOOTING ............................F-1 SPECIFICATIONS ............................. G-1 ACCESSORIES AND OPTIONS ........................H-1 DELIVERY CHECKLIST ............................
- Page 4 CONTENTS i-iv 547095D1 C Rev Find manuals at https://best-manuals.com...
-
Page 5: Table Of Contents
SAFETY SAFETY Contents Safety Alert Symbol ............................A-3 Safety Messages ............................A-3 Informational Messages ..........................A-3 Safety Signs ..............................A-4 Safety Sign Location ............................A-4 General ..............................A-4 Important Safety Information .......................... A-4 General Hazard Information ........................... A-5 Pressurized Air ............................A-5 Asbestos Information .......................... - Page 6 SAFETY 547095D1 C Rev Find manuals at https://best-manuals.com...
-
Page 7: Safety Alert Symbol
SAFETY SAFETY ALERT SYMBOL FIG. 1: The safety alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Look for the safety alert symbol both in this manual and on safety signs on this machine. The safety alert symbol will direct your attention to information that involves your safety and the safety of others. -
Page 8: Safety Signs
SAFETY SAFETY SIGNS Make sure machine will not be damaged or be made unsafe by operation, lubrication, maintenance or repair WARNING: DO NOT remove or obscure procedures chosen. Information, specifications, and safety signs. Replace any safety signs that illustrations in this publication are based on information readable missing. -
Page 9: General Hazard Information
SAFETY GENERAL HAZARD INFORMATION Any additional precautions should be observed based on the conditions and environment where the machine is Do not start engine until area is free of personnel and as being used. a warning honk horn twice to alert others and to avoid personal injury due to unexpected machine movement. -
Page 10: Mounting And Dismounting
SAFETY Mounting and Dismounting FIG. 2: Mount and dismount machine only at locations with steps and/or handholds (1). Before mounting machine, clean steps and handholds. Inspect stairs and handholds. Make any necessary repairs. Face ladder whenever mounting or dismounting machine. Maintain three-point contact with the steps and handholds. -
Page 11: Before Starting Engine
SAFETY Before Starting Engine Only operate machine while in operator's seat. Seat belt must be fastened while operating machine. Only operate Start engine only from operator compartment. Never controls while engine is running. short across starter terminals or batteries. Shorting could Check for proper operation of all controls and protective damage electrical system or cause unexpected machine devices while operating machine slowly in an open area. -
Page 12: Parking
SAFETY Do not allow passengers anywhere on machine except Crushing Prevention and Cutting on an approved passenger seat. Passengers must have Prevention passenger seatbelt securely fastened during any operation. Support equipment properly when performing work under equipment. Do not depend on hydraulic cylinders to hold After operating in muddy conditions, allow sufficient time equipment. -
Page 13: Rollover Protective Structure (Rops
SAFETY Rollover Protective Structure (ROPS) FIG. 4: Do not make any modifications to ROPS as this will affect protection provided. Do not alter structure by welding, cutting, adding weight, or drilling holes into structure. Any alteration not specifically authorized by AGCO invalidates AGCO certification for ROPS. -
Page 14: Lines, Tubes And Hoses
SAFETY Filler cap must be cool enough to touch with a bare hand. Follow the standard procedure in this manual to remove hydraulic tank and transmission filler caps. Lines, Tubes and Hoses Do not bend or strike high pressure lines. Do not install any lines bent or damaged. -
Page 15: Batteries
SAFETY Batteries FIG. 8: Electrolyte is an acid. Electrolyte can cause personal injury. Do not allow electrolyte to contact skin or eyes. Always wear protective glasses for servicing batteries. Wash hands after touching batteries and connectors. N060811005 FIG. 8 FIG. 9: Gases from a battery can explode. Keep any open flames or sparks away from top of a battery. -
Page 16: Noise
SAFETY Noise FIG. 11: Wear proper hearing protective devices such as earmuffs or earplugs to prevent loss of hearing due to high noise levels. 0053 FIG. 11 FIRE AND EXPLOSION PREVENTION FIG. 12: All fuels, most lubricants, and some coolant mixtures are flammable. -
Page 17: Fire Extinguisher
SAFETY FIG. 13: Use caution when refueling a machine. Do not smoke while refueling and do not refuel near open flames or sparks. Always stop engine before refueling. Fill fuel tank outdoors. N060811008 FIG. 13 Fire Extinguisher FIG. 14: Make sure that a fire extinguisher is available and be familiar with operation. -
Page 18: Traveling On Public Roads
SAFETY TRAVELING ON PUBLIC ROADS Always walk around and visually inspect machine before traveling on public roads. As a warning, honk the horn twice before starting engine. Check for damage and/or faulty components that can fail and create a hazardous condition. -
Page 19: Side View
SAFETY Side View S092211001 FIG. 15 FIG. 15: Side View FIG. 16: Warning - Radar Unit (1) The safety sign is located on outside of frame rails on both sides. Do not look directly into face of ground speed sensor while in operation. - Page 20 SAFETY FIG. 17: Warning - No Passengers (2) The safety sign is located on left front post inside cab. Do not allow passengers anywhere on machine except on an approved passenger seat. Severe injury or death could result from a fall or from contact with moving components or machinery.
- Page 21 SAFETY FIG. 20: Warning - High Pressurized fluid (5) - Avoid contact with high-pressure fluids. Oil leak may produce high pressure fluid stream which can penetrate skin. Do not touch stream or use hands to locate leak. Search for leaks with a piece of wood or cardboard. Protect hands and body from high pressure fluids.
- Page 22 SAFETY FIG. 23: Safety sign locations for NO Ether and Turn Engine Off. S092111006 FIG. 23 FIG. 24: Warning - Ether (1) - DO NOT use ether (starting fluids) at any time, use could result in engine damage and/or personal injury. Safety sign is located in the front of machine on the cooler assembly bracket.
-
Page 23: Front View
SAFETY Front View S082411006 FIG. 26 FIG. 26: Front View FIG. 27: Warning - Battery Explosion Hazard (1) The safety sign is located on front frame of machine and on hold down bracket for batteries. Improper jumper cable connections can cause explosion resulting in personal injury.When using jumper cables, always connect positive (+) cable, from external source, to positive (+) jump start post and negative (-) cable, from... - Page 24 SAFETY FIG. 28: Warning - Hot Surface (2) The safety sign is located under muffler on right side of machine. Avoid contact with hot surfaces. Exhaust piping and engine components become hot during engine operation and cool slowly after engine shutdown. Any contact with hot surfaces can cause severe burns.
-
Page 25: Rear View
SAFETY Rear View S082511002 FIG. 30 FIG. 30: Rear View FIG. 31: Warning Hazard - Three Point Hitch Control (1). The safety sign is located on each rear fender of machine. Do not stand on or between implement and machine while any hitch controls are being operated. - Page 26 SAFETY FIG. 32: Warning - Operators Manual (2) The safety sign is located on right rear post and rear power outlet panel inside cab. Read and understand the operator and safety instructions in operator's manual and on machine. Locate and understand control operations.
- Page 27 SAFETY FIG. 35: Category 1 according to EN 15695-1:2009 Cab Filtration (5) - location of this sign is on the right rear post inside cab. Cab does not provide a specified level of protection against hazardous substances. FIG. 35 FIG. 36: Warning - High Pressurized fluid (6) - Avoid contact with high-pressure fluids.
- Page 28 SAFETY FIG. 39: Lift symbol (2) is located inside drawbar support at rear of machine on both sides, and on the frame towards the front of machine on both sides. S082411003 FIG. 39 FIG. 40: Danger - Rear Rollover (3). Safety sign is located on back of machine.
- Page 29 SAFETY FIG. 41: Location of signs for DEF, Secondary Fuel Filter, and Primary Fuel Filter. FIG. 42: DEF filter sign (1) is located on the left side of machine in front of the supply module. S090111002 FIG. 42 FIG. 43: Fuel filter sign (2) is located on secondary fuel filter on left side of machine.
- Page 30 SAFETY NOTES A-26 547095D1 C Rev...
- Page 31 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...