Table of Contents
Advertisement
Quick Links
Operator's Manual
Rubber Track Tractor
MT755E CE
AGCC0755.E...1001-
MT765E CE
AGCC0765.E...1001-
MT775E CE
AGCC0775.E...1001-
North America
4205 River Green Parkway, Duluth GA 30096 USA
June 2018
Challenger is a registered trademark of Caterpillar
Inc. and is used under license by AGCO.
564006D1E
© AGCO 2018
EAME
Original Operator's Manual
English
Advertisement
Table of Contents
Related Manuals for Challenger MT765E CE
Summarization of Contents
1. Safety
1.1 Safety signs
Defines safety symbols, safety messages (DANGER, WARNING, CAUTION), and information messages.
1.3 Danger signs
Illustrates and explains specific 'Danger' signs for hazards like Power Take Off and Rear Roll Over.
1.4 Warning signs
Displays various 'Warning' signs indicating hazards such as battery explosion, belt entanglement, and fall off.
1.5 Informational signs
Details informational signs covering alternate exits, battery shut off, fuel filters, lift points, and tiedowns.
2. Introduction
2.1 Machine identification information
Covers machine identification, serial number definition, and intended use of the equipment.
2.5 Pre-Delivery
Outlines pre-delivery procedures and includes a checklist for machine preparation.
3. Operation
3.1 General inspection
Details performing a walk-around inspection of the machine before starting operations.
3.2 Start the engine
Provides instructions for starting the engine, including pre-start checks and normal conditions.
3.15 Cab filtration
Details servicing procedures for the primary fresh air filter and recirculation filter in the cab.
3.17 Machine management center
Guides on using the machine management center for settings, units, language, and system information.
3.22 Transmission
Explains transmission control, ground speeds, gear selection, and shifting procedures.
3.24 General hydraulic connections
Provides instructions for connecting and disconnecting hoses for various hydraulic components and implements.
3.32 Towing and transportation
Provides instructions for roading, towing, and transporting the machine safely.
4. Maintenance
4.1 Lubricant viscosities and refill capacities
Lists lubricant viscosities for different temperatures and provides refill capacities for machine fluids.
4.2 Service intervals
Presents a maintenance chart and schedule for routine service and inspections.
4.3 Fuel system
Details procedures for fueling, fuel cap, draining sediment, priming, and changing fuel filters.
4.5 Undercarriage (Mobil trac) system
Covers checks and changes for oil levels in drive wheel hubs, idler wheels, and roller wheels.
4.9 Track alignment
Covers procedures for checking and adjusting track alignment for optimal performance.
4.10 Cooling system
Details cleaning cooling cores, checking coolant levels, draining, and replacing thermostat.
4.15 Engine
Covers engine maintenance tasks: air filter, fuel filters, oil change, belts, and temperature checks.
4.17 Battery removal and installation
Details the procedures for safely removing and installing the machine's batteries.
5. Troubleshooting
5.1 Heating and air conditioning troubleshooting
Guides on diagnosing and resolving issues with the heating and air conditioning system.
5.4 Engine troubleshooting
Covers common engine problems and troubleshooting procedures for engine performance issues.
5.10 Machine Error Codes
Lists and explains various ECM error codes for different machine components and systems.
6. Specifications
6.1 Engine specifications
Provides detailed technical specifications for the machine's engine.
6.2 Torque specifications
Lists torque specifications for critical fasteners and components.
6.5 Machine specifications - MT700E
Provides specific technical details and features for the MT700E model.
Need help?
Do you have a question about the MT765E CE and is the answer not in the manual?
Questions and answers