Table of Contents
Advertisement
This page is used for the define of the
Global
Used for setting digits behind the decimal point for measurement results;
Line Width
Color
Calibration
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Curve
Left-click the
set the individual property of the
6.4.2 Setting>Magnification
This page's items are formed by the
Name
Names such as 4X,10X, 20X， are based on magnification of the Digital microscopes.
Resolution
Pixels per meter. Image device like microscopes have high
Clear All
Click the
Delete
Click
Up
Select a row in the magnification ratio and click
Down
Select a row in the magnification ratio and click
H4KAZFSD08DPX User Manual
Measurement Object
Figure 6-7 The Measurement Setup
Used for defining width of the lines for calibration;
Used for defining color of the lines for calibration;
Type: Used for defining shape of the endpoints of lines for calibration: Null means no EndPoint, rectangle
means rectangle type of endpoints. It makes alignment more easily;
along with the
Measurement
Measurement
Measurement
Figure 6-8 Comprehensive Magnification Settings Page
Clear All
button will clear the calibrated magnifications;
Delete
to delete the selected magnification;
properties.
command mentioned above will unfold the corresponding attribute settings to
Objects.
Toolbar's
Calibration
Resolution
value;
Up
to move up the currently selected magnification ratio;
Down
to move down the currently selected magnification ratio;
command.
Advertisement
Table of Contents
