WARNING
Do not pull cables tightly and add tension
to them. A drip loop is required where
applicable.
Do not place cables where they
can be crushed in any manner.
CAUTION
To avoid damage to the electronic circuit,
stop using this product while doing welding
work to the vehicle and/or trailers.
When cleaning monitors, cameras, and
DVRs, use a damp, lint-free cloth only.
Connect this unit only to other
compatible Verity components.
Although our products have built-in surge
and cross-polarity protection, ensure all
cables are connected properly. Improper
cable connections may damage the DVR.
Cables should not be allowed to touch hot
or rotating parts, such as the engine or
exhaust.
Do not locate the DVR near heat-
generating vents or devices.
Turn off power to the DVR when
connecting the camera(s).
5