Advertisement
Assembly Instructions for Model Numbers 1924, 1930, 1936, 1942, and 1948
ImPortAnt InformAtIon
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you
discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560
(Monday - Friday 9 a.m. to 4 p.m. EST) or email customer service at info@midwesthomes4pets.com.
PArts IdentIfIcAtIon
A - Fold and Carry Crate (1)
Assembly InstructIons
1. Remove the folded Crate from the carton with the Plastic Pan
on the bottom and the logo nameplate facing up. Keep the
Crate flat on the floor as you begin assembly.
2. Release the hook that holds the Crate together in the folded
position.
3. Unfold the Crate like you would open a book.
B - Plastic Pan (1)
C - Divider Panel (1)
800-428-8560
midwesthomes4pets.com
P .O. Box 1031
Muncie, Indiana 47308
D - Plastic Carrying Handle(s)
1
Advertisement
Table of Contents
Related Manuals for Midwest Ovation 1924
Summary of Contents for Midwest Ovation 1924
- Page 1 800-428-8560 midwesthomes4pets.com P .O. Box 1031 Muncie, Indiana 47308 Assembly Instructions for Model Numbers 1924, 1930, 1936, 1942, and 1948 ImPortAnt InformAtIon Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement. Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
- Page 2 4. Lift up on the top wires to form the top and the sides of the Crate. Top Panel 5. The bottoms of the two side panels should rest Bottom inside the bottom panel frame. One edge Panel Side of the top panel should set inside the side panel Panels while the other edge should rest outside of the other side panel (as illustrated).
- Page 3 8. The Crate is now fully assembled. To operate the door simply lift up with the handle and rest the door on top of the crate, keeping it “up and away” for easy access to the inside of the Crate. Remove the Divider Panel from inside of Crate and set aside till needed.
- Page 4 To Disassemble the Crate: 1. Gently press on the top panel and pull the end panel outward to release the hooks. Let the end panel gently fall into place at the bottom of the Crate. 2. Repeat Step 1 with the Door Panel. 3.
- Page 5 NOTES: To protect the finish of your Pet Home and the bottom pan, use only mild, non-abrasive cleaners and water. Any coarse scrubbing or abrasive materials could damage the finish. DO NOT expose the plastic pan to direct sunlight for extended periods of time as this may lead to warping or damage to the pan.
Need help?
Do you have a question about the Ovation 1924 and is the answer not in the manual?
Questions and answers