Sony Blu-ray Disc BDP-S2200 Service Manual page 25

Diag Menu (Wireless LAN Test)
Outline:
Activate Wireless LAN Tests
(Window 1)Select Wireless LAN Test Category
Operation:
[LEFT] [RIGHT] Select Category
[DOWN][ENT] Activate the selected Category.
[RET] Return to Service Top Menu.
(Window 2) Select Wireless LAN Test
Operation:
[1] Show Wireless LAN module Information
[2] Connect Access Point
[3] Start display RSSI value.
[4] Start Ping Test
[UP][DOWN] Select Test
[ENT] Activate and Start Test
[RET] Return to test category selection.
> Show WLAN HwInfo See Window 2)
Serial : Serial Number
Hard : Hardware Version
Mac Mac Address
> Connect to Access Point (See Window 3)
Connect Access Point only with the following AP settings.
Authentication method: NO-ENCRYPT
WEP key abcdef1234
SSID SONY-Test-R
PMK ABCDE12345
IP: 192.168.1.10
Net mask: 255.255.255.0
Broadcast 192.168.1.255
When connect to AP, Status is "Connected!"
When cannot connect to AP, Status is "can't Connect!"
> Start Display RSSI Value (See Window 4)
Display RSSI value.
> Start Ping Test (See Window 5)
Ping Test.
IP address use the value of "192.168.1.10".
5-8
BDP-S2200