Advertisement
Available languages
Available languages
FEATURES:
•
Manual time setting.
•
Continuous calendar up to year 2099.
•
Date and weekday display.
•
Temperature alternatively in °C or °F.
•
Time in optional 12/24 hour format.
•
Weekday display in 7 languages: English,
German, Italian, French, Spanish,
Netherlands, and Danish
•
Automatic snooze function (5 minutes).
•
Thermometer: Indoor measurement ranges:
0°C (32°F) ~ 50°C (122°C)
outdoor measurement ranges: -19.9°C
(-3.8°F) ~ 59.9°C (139.8°F)
•
Display Hi/Lo Outdoor Temperature
•
Hygrometer: measurement range: 20% ~
95% RH. Separate display of indoor use.
•
LED back light display (auto off after
5 seconds).
•
Battery: 2 x AA /LR6 (not Included).
LCD SCREEN AND SETTINGS:
(Fig. A)
1. Weather forecast
2. Indoor temperature in °C/°F values
3. RF icon
4. Outdoor temperature in °C/°F values
5. Indoor hygrometer values
6. Summer season
7. Time zone
8. 12/24 hour format
9. Alarm 1 icon
10. Time
11. RCC icon
12. SNOOZE icon
13. Week
14. Date
15. Cozy icon
FUNCTION KEYS (Fig. B):
16. Alarm key
17. Set key
18. Snooze/Light key
19. Up key
20. Down key
21. Wave key
WIRELESS OUTDOOR SENSOR
Part C –Wireless Outdoor Sensor
C1: Wireless Outdoor Sensor battery
compartment
Wireless remote sensor (transmitter)
•
Transmitter frequency: 433.92 MHz.
•
Range of transmission is up to 60m
(200 feet).
•
Insert the 2 batteries in to the transmitter. Pay
attention to observe the correct polarity.
INITIAL OPERATION:
•
Obstacles can severely impair the of the
transmission
•
Protect the transmitter against any direct
sunlight penetration
•
Open the battery compartment on the rear
side of the outdoor remote sensor and insert
the batteries. Pay attention to observe the
correct polarity. Select the °C/°F display by
pushing the button inside the compartment.
Close in the battery compartment
•
Open the battery compartment on the rear
side of the receiver and insert the batteries.
Pay attention to observe the correct polarity.
Close the battery compartment.
•
When you insert the batteries, all the icon
on the LCD display will briefly light up for 3
seconds, and you will hear a beep tone, and
detect indoor temperature & humidity.
•
The receiver will now start to make a
connection to the outdoor remote sensor.
This operation takes about 3 minutes and is
displayed by a flashing reception RF antenna
symbol in the "OUTDOOR" display area on
the receiver.
•
After receiver has created a connection to the
outdoor remote sensor, it will then b enters
the clock mode.
MANUAL TIME SETTING:
•
Press and hold down the "SET" button for
2 seconds, the Year display 2012 starts to
flash. Now use "▲" and "▼" buttons to set the
correct year.
•
Press "SET" to confirm your setting, the
Month display starts to flash. Now use "▲"
and "▼" buttons to set the correct month.
•
Press "SET" to confirm your setting, the Date
display starts to flash. Now use "▲" and "▼"
buttons to set the correct date.
•
Press "SET" to confirm your setting, the
language selection for the Weekday displays
starts to flash. Now use "▲" and "▼" buttons
to select a language.
•
Press"SET"to confirm your setting, the Time
zones start to flash, Now use "▲" and "▼"
buttons to set a correct time zone (-12 to
+12).
2
•
Press "SET" to confirm your setting, the 12/24
hour mode display starts to flash. Now use
"▲" and "▼" buttons to set the correct 12/24
hour mode.
•
Press "SET" to confirm your setting, the Hour
display starts to flash. Now use "▲" and "▼"
buttons to set the correct hour.
•
Press "SET" to confirm your setting, the
Minute displays starts to flash. Now use "▲"
and "▼" buttons to set the correct minute.
•
Press "SET" to confirm your setting and to
end the setting procedures, enter the clock
mode.
F.Y.I.:
•
After 7 seconds without pressing any button,
the clock switches automatically from Set
Mode to Normal Time Mode.
•
There are 7 languages of Weekday: English,
German, Italian, French, Spanish, Dutch and
Danish.
SETTING THE DAILY ALARMS:
•
under the clock mode, press once ALARM
button, LCD display the "" icon.
•
Press and hold down the ALARM button for
2 seconds until Alarm Time flashing icon is
displayed. Now use the "▲" and "▼" buttons
to select the alarm time you require and
briefly press the ALARM button to set this
Alarm time.
•
The Hour display of the Alarm time starts to
flash. Use the "▲" and "▼" buttons to set
the required hour. Press ALARM button to
confirm your setting
•
The Minute display of the Alarm time starts
to flash. Use the "▲" and "▼" buttons to set
the required minute. Press ALARM button to
confirm your setting and to end the setting
procedure.
•
To activate or deactivate the daily alarms,
briefly press the "ALARM" button once.
F.Y.I.:
•
After 7 seconds without pressing any button
the clock switches automatically from setting
mode to Normal clock mode.
•
The alarm will sound for 1 minutes if you
do not deactivate it by pressing any button.
In this case the alarm will be repeated
automatically after 24 hours.
Weather forecast (Table)
sunny
lightly cloudy
•
Rising alarm sound (crescendo, duration:
1 minutes) changes the volume 4 times whilst
the alarm signal is heard.
Automatic SNOOZE function:
•
To activate the automatic snooze function:
While the alarm is sounding, press the
"SNOOZE/LIGHT" button to activate the
snooze function. When the snooze function
is activated, the "Zz" symbol appears in the
display.
•
This operation moves the alarm back by
5 minutes and the alarm will restart at this
time.
°C/°F temperature display
•
The temperature is displayed either in °C/°F.
Briefly pressing the "▼" button allows you to
switch between the individual modes.
Radio connection to outdoor sensor:
Insert the 2 batteries in to the transmitter, Pay
attention to observe the correct polarity. One
sensor is suplied with your receiver
•
Press and hold down the "▼" button for 2
seconds to search for outdoor sensors (to
erase the current data inside the RC clock).
Backlight:
•
Briefly press the SNOOZE/LIGHT button to
activate the display lighting for 5 seconds.
Weather forecast
•
The weather forecast is calculated base on
the following humidity & temperature data
and may deviate from the actual weather
conditions if the station in central heating
room or the humidity & temperature record is
big different from the real natural state.
Please see table
When forecasting the weather, the station has
4 icons: sunny, light cloudy, cloudy and rainy
Storage
It is recommended to store in a covered and dry
place at an ambient temperature not higher than
+ 40°C with relative humidity above 70% and the
absence in the environment of dust, acid and
other vapours.
cloudy
rainy
3
Advertisement
