4.4.2
Pair Connection Client
To click "DEVICE SERVER" >> "Port1" to choose "Pair Connection" mode, please refer to Fig 4-10.
After user had saved the setting, user must reboot iDS modules(please refer to the chapter
"3.2.9 restart").
Click "Port1"
1
Programmable Device Server User Manual (V1.1, Mar. 2020)
Choose "Pair Connection"
2
Choose "Client"
3
Set Pair Connection server's IP and port number
4
Set Pair Connection client's port
5
number
Click "Save" button to
6
save the setting.
Fig 4-10 Pair Connection Client
- 39 -