Configuring Virtual Com Ports - ICPDAS iDS-718i-D User Manual

4.2.3

Configuring Virtual COM Ports

Please refer to below steps to set and use the virtual COM ports.
1. Double click the VxComm Utility shortcut on the desktop.
2. Click the "Add Server*s+" button to connect to the iDS-700, then user assign a COM Port
number and click "OK" to save your settings, please refer to Fig 4-3.
Click "Add Servers" button
1
Set COM's Name
2
3. Click on iDS-700's name and check the virtual COM port mappings on the PC, please refer to
Fig 4-4.
Click iDS-700's name
1
2
Programmable Device Server User Manual (V1.1, Mar. 2020)
Fig 4-3
iDS-700 COM's Name
Fig 4-4
Click "OK" to run
3
the setting.
- 33 -