Table of Contents
Advertisement
Quick Links
Intamix Pro
Thermostatic Mixing Valves
Installation and Maintenance Instructions
Intatec Ltd
Airfield Industrial Estate
Hixon
Staffordshire
ST18 0PF
In this procedure document we have endeavoured to make the
information as accurate as possible.
Tel: 01889 272 180
We cannot accept any responsibility should it be found that in
Fax: 01889 272 181
any respect the information is inaccurate or incomplete or
email: sales@intatec.co.uk
becomes so as a result of further developments or otherwise.
web: www.intatec.co.uk
© Intatec Ltd. 2022
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Inta Intamix Pro 60001CP
Summary of Contents for Inta Intamix Pro 60001CP
- Page 1 Intamix Pro Thermostatic Mixing Valves Installation and Maintenance Instructions Intatec Ltd Airfield Industrial Estate Hixon Staffordshire ST18 0PF In this procedure document we have endeavoured to make the information as accurate as possible. Tel: 01889 272 180 We cannot accept any responsibility should it be found that in Fax: 01889 272 181 any respect the information is inaccurate or incomplete or email: sales@intatec.co.uk...
- Page 2 Introduction A thermostatic mixing valve (TMV) is used in domestic hot water systems. It’s function is to maintain the temperature of the mixed water, supplied to the user, constant at the set value when there are variations in the supply pressure and temperature of the incoming hot and cold water or in the flow rate.
- Page 3 Dimensions Product Code 60001CP G½ 60003CP G¾ 1 18 60004CP 60005CP G1¼ 60006CP G1½ 125.5 60023CP 138.5 © Intatec Ltd 2022...
- Page 4 Construction Temperature Regulating disc sensor Flow Rate Chart 2” 1½” 1¼” 1” ¾” ½” Pressure - kPa © Intatec Ltd 2022...
- Page 5 Application Cold Water Mixed Water Hot Water Installation If the thermostatic mixing valve is not installed, commissioned and maintained properly, according to the instructions contained in this manual, it may not operate correctly and may endanger the user. Before installation the system must be checked to ensure that it’s operating conditions are within the range of the valve;...
- Page 6 Installation Continued It is essential that access to the valve is totally unobstructed for any maintenance which may be required or to the connections. The pipework to or from the valve must not be used to support the valve unless adequately supported.
- Page 7 Preset Locking Position the adjusting knob to the temperature required. Unscrew the retaining screw. Remove the knob by pulling away from the valve and reposition on the splined shaft so that the internal slot locates on the position indicator on the knob frame. Re fit and tighten the retaining screw.
- Page 8 Problem Solving Continued 3 Erratic flow i. Insufficient water supplies. ii. Fluctuations in the supply pressures/temperatures. iii. Adverse effect created by other draw off points on the system. 4 No flow/reduced flow from valve i. In line filters are blocked. ii.
Need help?
Do you have a question about the Intamix Pro 60001CP and is the answer not in the manual?
Questions and answers