January 31, 2007 ABSTRACT This document provides a status update of the CallPilot Mini current S/W release. The release discussed herein is 1.6. The S/W load released is Build 16.00.23.22 The overall purpose of the document is to provide insight into the existing issues, limitations and/or restrictions, which existed at the time of this S/W release.
CallPilot Mini 1.6a software. 1.2 Timeline for Software Upgrade For upgrade to CallPilot Mini 1.6a s/w, the estimated time is 10 – 15 minutes. For CallPilot Mini system to boot up, the estimated time is 3 – 5 minutes.
1.5 General Voicemail Information Connections to CallPilot Mini CallPilot Manager can be made by specifying the IP address (e.g. http://192.168.110.10) The system is only capable of supporting two languages. Refer to section of supported languages. Routing codes must be used to dial external extensions with the telset player from desktop or CallPilot Manager.
0290-Global Rev1) [Q01329519] CallPilot Mini and DNS Servers Problem: When using a FQDN with the CallPilot Mini, it will not work using an Active Directory-integrated DNS server but will work with a Primary/Secondary Standard DNS server. This affects CallPilot Mini release 1.5 and 1.6. This situation can cause a problem with Networking.
2.2.2 Over 50 CRs fixed with the introduction of the 4.0 Desktop Messaging client over release 2.5 Please note that CallPilot Mini does not support fax messaging, My CallPilot web interface, Call Sender functionality, Message Forwarding and any feature requiring a CallPilot server.
3.1.2 CallPilot Mini 1.6a Service Update Software Upgrade from ATA Flash Card Note: When upgrading software within the CallPilot Mini 1.6 stream, it is not necessary to utilize a serial connection. If for any reason it becomes necessary to view the upgrade messaging, use the serial connection setup shown here.
Page 9
For each option press Enter to accept the default value; otherwise enter the new value and press Enter. Press c to continue (boot) when prompted to do so. Issue 1.3 CallPilot Mini v1.6a Service Update Page 9 of 15 Release Notes...
5. The CallPilot boots up automatically once Backup/Restore is completed, and returns to its normal state. For specific instructions, please refer to the CallPilot Mini Installation and Maintenance Guide. 4.2 CPModemSecure Tool To activate the modem, follow the steps described in the CallPilot Modem Access.ppt document.
4.3 Language Configuration Tool Please see the associated document for details: CallPilot Language Configuration Utility.doc in the Language Configuration/ folder in the CP Utilities zip file. CallPilot Mini 1.6 Supported Voice Prompt Languages: Note: Bolded languages introduced with 1.6a Arabic...
For English, CallPilot Mini Installation and Maintenance Guide For French (Euro), CallPilot Mini Installation and Maintenance Guide All CallPilot Mini documentation is located on the software and documentation CD shipped with the CallPilot Mini package or on the Nortel Technical Support Portal at www.nortelnetworks.com/support.
Not Supported German Not Supported French Not Supported Italian Not Supported Spanish Not Supported Danish Norwegian Swedish Brazilian Portuguese Issue 1.3 CallPilot Mini v1.6a Service Update Desktop Client 2.5 (2.01.27.14) (2.50.06.17) Supported Supported Supported Supported Supported Supported Supported Supported Supported Supported...
6 Unified Messaging Compatibility Matrix The following environments are supported by CallPilot Mini 1.6a. 6.1 Operating Systems Client Operating Systems: Windows 95B Windows 98 SE Windows 2000 Professional Windows 2000 Server (All Editions) Windows XP Professional Windows 2003 Server (All Editions) Win NT 4.0 SP6a...
Citrix® MetaFrame XP (Standard, Enterprise or Advanced Editions) on Windows 2000 and 2003 Servers Citrix Metaframe Presentation Server 3.0 on Windows 2003 Server (All Editions) Issue 1.3 CallPilot Mini v1.6a Service Update 2.01.27.14 Release Notes 4.04.04.17 2.50.06.17 Page 15 of 15...