Parts Definition
Mounting Bracket
Front Cover (ABS)
Sound Selection Switch
Fixing Bolt
Installation
ㆍ First, cut a square hole (see the above dimensions) on the panel ① to mount the product.
ㆍ
ㆍ ㆍ Insert the rubber packing ② and the product into the square hole of the panel.
ㆍ ㆍ Place the mounting bracket (2EA) ③ and ④ (provided with the product) on the sides of the body and tighten it with a screwdriver ⑤
please ensure the screws are securely tightened.
ㆍ ㆍ Max. thickness allowed for mounting panel is 10mm.
Installation Environment and Protection Rating
SOUND SET
SD CARD
ON
1 2 3 4
• This product is designed for use with protection rating of IP54.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indica-
ted(IP54), it may cause malfunction or damage to the product.
• For further information, please visit our website(www.qlight.com).
Body (ABS)
Operation
Indicator
Volume Switch
MAX.
MIN.
VOL.
PLAY MODE
Back Cover (ABS)
Rubber Packing
SOUND
DW
POWER
STOP
CH1
CH2
BUSY
CH3
CH4
COM
CH5
SOUND SET
ON
1 2 3 4
3
Terminal Block
Terminal Block Cover
(PC)