Zline LUXURY Installation Manual page 17

Single wall oven
Table of Contents

Advertisement

INSTALLATION
• Be sure your appliance is properly installed and grounded by a qualified technician;
Be sure your appliance is properly installed and grounded by a
failure to do so may result in death or electrical shock. Ask your dealer to recommend a
technician or an authorized repair service.
qualified technician or an authorized service provider.
This oven is manufactured with a neutral (white) power supply wire
• This oven is manufactured with a neutral (white) power supply wire and a cabinet
and a cabinetconnected green (or bare) ground wire twisted together.
connected green (or bare) ground wire twisted together.
After making sure that the power has been turned off, connect
• After making sure that the power has been turned off, connect the flexible conduit from
the oven to the junction box using a UL listed conduit connector. The Grounded Neutral
listed conduit connector. The Grounded Neutral and Ungrounded
Neutral Graphics on the following pages and the instructions
and Ungrounded Neutral graphics on the following pages, along with the instructions
provided, present the most common way of connecting ovens. Your
provided, present the most common way of connecting ovens. Your local codes and
local codes and ordinances, of course, take precedence over these
ordinances, of course, take precedence over these instructions. Complete electrical
instructions. Complete electrical connections according to local
codes and ordinances.
connections according to local codes and ordinances.
1 Disconnect power.
2 Remove junction box cover.
1. Disconnect power.
3 Install a UL listed or CSA approved conduit connector to the
2. Remove junction box cover.
3. Install a UL listed or CSA approved conduit connector to the junction box.
4
4. Route the flexible electrical supply conduit from the oven to the junction box through a UL
listed or CSA approved conduit connector.
5. Tighten screws on conduit connector.
5 Tighten screws on conduit connector.
For Single Oven, use 10 gauge copper or aluminum wire.
For Double Oven, use 8 gauge copper or aluminum wire.
Electrically ground oven.
Failure to do so can result in death, re or electrical shock.
junction box.
UL or CSA Listed C onduit C onnec tor
UL or CSA Listed Conduit Connector
the junction box through a UL listed or CSA approved conduit
connector.
3-WIRE CAB
IMPORTAN
local codes p
1 Disconnec
A
B
C
D
A. Ju
B. Bl
C. Ne
D. Gr
Ba
E. Ca
2 Connect th
connector.
3 Connect th
bare) wire
4 Connect th
connector.
5 Install jun
7
13

Advertisement

Table of Contents
loading

Table of Contents