SUNMED 9996-1-250 User Manual

User Guide
The Humidifier Tubing is used to attach a bubble humidifier
bottle to an oxygen concentrator. This product is intended
to be used by patients who have a prescription for home
oxygen and have received training from a trained healthcare
professional. The Humidifier Tubing is disposable and
intended for single patient use.

Product Use

1. Wash your hands.
2. Make sure the bubble humidifier bottle is upright and
securely attached to the oxygen concentrator (1).
Note: Bubble humidifier placement will vary
depending on oxygen concentrator.
3. Open the package and remove the Humidifier Tubing.
4. Screw the male thread grip (2) into the oxygen inlet port
located on top of the bubble humidifier bottle.
5. Attach the Ribbed End Connector (3) to the concentrator's
oxygen outlet port.
6. Connect your oxygen extension tubing to the oxygen
outlet port (4) located on the bubble humidifier.
7. Set flow to your prescribed oxygen setting.
Humidifier Tubing
9996-1-250
Please read and follow the Instructions for Use
provided with the products prior to using the Humidifier Tubing
Ribbed End
Connector
1
2
3
3-Channel Safety Tubing
Male Thread Grip
4
800-433-2797 www.Sun-Med.com