Christ Touch-it XELO Operating Instructions Manual

Hide thumbs Also See for Touch-it XELO:

Advertisement

Quick Links

Touch-it XELO
Operating Instructions
 Touch Interface
 Different Housings
Copyright / © Christ Electronic Systems GmbH
a member of the Christ Company Group
Touch-it XELO
 Sizes From 7" to 23.8"
 Ready For Use Touch Panel PC
1 / 47
March 2017, Revision 17
Document No.: E461201

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Touch-it XELO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Christ Touch-it XELO

  • Page 1  Touch Interface  Sizes From 7” to 23.8”  Different Housings  Ready For Use Touch Panel PC Copyright / © Christ Electronic Systems GmbH 1 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 2 Christ Electronic Systems GmbH. Technical changes Christ Electronic Systems GmbHreserves the right to change specifica- tions, executions and technical data held within this document without prior notice.
  • Page 3: Table Of Contents

    General ........................5 Commissioning ...................... 9 Mounting ................................9 2.1.1 Touch-it XELO Open Frame / Open Frame glass ......................9 2.1.2 Touch-it XELO Front Panel / Front Panel glass ......................10 2.1.3 Touch-it XELO VESA / VESA glass ..........................11 Interfaces Connector Side (CPU T56N) .....................
  • Page 4 FCC Conformity (only Devices with FCC compliance) ................. 45 Maintenance plan ............................. 46 Repairs .................................. 46 Cleaning ................................46 Copyright / © Christ Electronic Systems GmbH 4 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 5: General

    AMD® GX-415GA™ Quad Core 1.5 GHz 64 Bit Intel® Core™ i5-4300U Dual Core 1.9 GHz 64 Bit Intel® Core™ i5-6300U Copyright / © Christ Electronic Systems GmbH 5 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 6 Standard 7 Enterprise / Premium Windows® Embedded Standard 7 (WS7E) Linux (optional) Windows® Embedded 8 Standard Windows® 10 IoT Linux Copyright / © Christ Electronic Systems GmbH 6 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 7 24 VDC ± 20% Power Consumption See specific datasheet Power Switch Only VESA and VESA glass housing Copyright / © Christ Electronic Systems GmbH 7 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 8 5 ~ 80% (non condensing) Certification CE, EN55022, EN55024, DIN EN ISO 9001 CAUTION! Never cover the Touch-it XELO completely or build it in a small closed and unvented housing. Copyright / © Christ Electronic Systems GmbH 8 / 47...
  • Page 9: Commissioning

    2 Commissioning 2.1 Mounting 2.1.1 Touch-it XELO Open Frame / Open Frame glass The variant Touch-it XELO Open Frame is designed for customer specific mounting. Each Open Frame Panel has its own cut-out drawing. For example: For the appropriated drawing see the specific data sheet.
  • Page 10: Touch-It Xelo Front Panel / Front Panel Glass

    Touch-it XELO Operating Instructions 2.1.2 Touch-it XELO Front Panel / Front Panel glass The variant Touch-it XELO Front Panel is designed for front mounting. Each Front Panel has its own cut-out drawing. For the appropriated drawing see the specific data sheet.
  • Page 11: Touch-It Xelo Vesa / Vesa Glass

    Touch-it XELO Operating Instructions 2.1.3 Touch-it XELO VESA / VESA glass The variant Touch-it CE VESA is designed for VESA MIS-D, 75, C mounts. Some panels can also be mounted with VESA MIS-D, 100, C. Suitable mounting variants are: VESA Desk Stand Arm Mounting System VESA-SA75 Copyright / ©...
  • Page 12: Interfaces Connector Side (Cpu T56N)

    Power Connector Phoenix Connector side Touch-it XELO (CPU N270 / T56N) Connector side Touch-it XELO extended (CPU N270 / T56N) On/Off is only included with housing VESA and VESA glass. All interfaces are described in the chapter Interfaces. Copyright / © Christ Electronic Systems GmbH...
  • Page 13: Interfaces Connector Side (Cpu Gx-415Ga / I5-4300U)

    1 x 802.11 ac/a/b/g/n 2.4 GHz, 5 GHz, (optional) Power Connector Phoenix Connector side Touch-it XELO (CPU GX-415GA / i5-4300U) Connector side Optional (CPU GX-415GA / i5-4300U ) On/Off is only included with housing VESA and VESA glass. All interfaces are described in the chapter Interfaces.
  • Page 14: Interfaces Connector Side (Cpu I5-6300U)

    1 x 802.11 ac/a/b/g/n 2.4 GHz, 5 GHz, (optional) Power Connector Phoenix Connector side Touch-it XELO (CPU i5-6300U) Connector side Optional (CPU i6-4300U ) On/Off is only included with housing VESA and VESA glass. All interfaces are described in the chapter Interfaces.
  • Page 15: Extension Connector (Additional Interfaces)

    1 x Emergency Stop 8 x Individual Selectable Buttons / Switches / LEDs EtherCAT 1 x EtherCAT® Slave (Buttons / Switches / LEDs) Additional connector side Touch-it XELO Automation Copyright / © Christ Electronic Systems GmbH 15 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 16: Software

    Boot Boot option. Security Set setup administrator password. Save&Exit Exit system setup after saving the changes. Copyright / © Christ Electronic Systems GmbH 16 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 17: Changing Display Resolution

    In the BIOS Setup mode choose the Advanced Menu select LVDS(eDP/DP) Configuration. Set the LCD Panel Type. Save this configuration by pressing “F4” and selecting “Yes” afterwards. Copyright / © Christ Electronic Systems GmbH 17 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 18: Changing Boot Priority

    Set the Boot Option #1 to the USB Device, by pressing “Enter” and select the USB Device. Save this configuration by pressing “F4” and selecting “Yes” afterwards. Copyright / © Christ Electronic Systems GmbH 18 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 19: Changing Com Port

    Serial Port1 Configuration. Set the Device Mode to your favourite interface. Save this configuration by pressing “F4” and selecting “Yes” afterwards. Copyright / © Christ Electronic Systems GmbH 19 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 20: Redo Backup And Recovery

    There are two ways to create a Redo USB Drive with VMWare or directly booting a LiveCD. VMWare:  Christ Electronic Systems GmbH created a complete VMWare Virtual Machine running Redo V1.0.3  Download and Install VMWare Player 5.0 or higher ...
  • Page 21  Plug in a 4GB or greater USB Stick and choose Administration -> Create Bootable USB.  Choose the Disk to use, press Make Startup Disk and wait a few minutes. Copyright / © Christ Electronic Systems GmbH 21 / 47...
  • Page 22: Restoring An Image With Redo Backup And Recovery

    Operating Instructions 3.2.2 Restoring an Image with Redo Backup and Recovery If you have a Touch-it XELO Image Backup, copy the folder and files to the root directory of the Redo USB Drive. (See Chapter Software->Redo Backup and Recovery)  Plug in an USB Keyboard and the Redo USB Drive directly to the Touch-it XELO port without using a USB Hub.
  • Page 23 After 5-10 minutes depending on the image size the restoring should be complete.  Copyright / © Christ Electronic Systems GmbH 23 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 24: Generate An Usb Drive For Bios Update

    AFUDOS.exe  INFORMATION! The needed files you can get from Christ Electronic Systems. 3.3.2 Format the USB Stick and make it bootable  Start the “HP USB Disk Storage Format Tool” by running the File “HPUSBFW_v2.2.3.exe” on the Development / Desktop PC as Administrator.
  • Page 25: Copy The Bios Update Files

     V00C9MXX.rom,  go.bat and AFUDOS.exe 3.3.4 Configure the BIOS settings Plug in a USB Keyboard and the bootable USB Drive to the Touch-It XELO Enter the BIOS Setup by pressing “Delete” Following screen will appear on the monitor/display Enter the Bios menu and set the Hard Disk Boot Priority to your USB connected Drive.
  • Page 26: Update The Bios

    Press “F4” + “Enter” and the Touch Panel will reboot. 3.3.5 Update the BIOS Run go.bat in the MS-DOS command console, wait until done and reboot. Copyright / © Christ Electronic Systems GmbH 26 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 27: Enhanced Write Filter Ewf

    Windows XP, Windows 7 or Windows 8 embedded operating systems are delivered by default with EWF protection from Christ Electronic Systems. This so called Enhanced Write Filter pre- vents write accesses to a protected drive (SSD/HDD) and therefore unintentional system chang- es (blue screens, viruses, user errors, etc.).
  • Page 28: Sftp Server

    Touch-it XELO Operating Instructions 3.5 SFTP Server Christ Electronic Systems ist equipped with a SFTP server. SFTP is tunneled with the SSH Protocol (Port 22). A special Client is necessary to get access. Use the WinSCP (http://www.winscp.net) or something similar.
  • Page 29 The right window show you the SFTP drives. Per Drag & Drop you can copy the files. Structure: “in” – Files from extern to Christ Electronic Systems ->write acces for both sides. “out” – Files from Christ Electronic Systems to extern ->write acces for Christ Electronic Systems only...
  • Page 30: Hi-Safe (Cpu N270 / T56N)

    3.6 Hi-Safe (CPU N270 / T56N) The tool Hi-Safe provides features over the current system. You can get the installation file from Christ Electronic Systems. 1. System Information: Show the information of CPU, VGA and RAM. 2. H/W Monitor: Show the information in the Super IO. Get the speed of fan, temperature and voltage.
  • Page 31 (input or output) and accessed for set/read pin’s data (low or high), upon the direction of pin configured. (The standard Touch-it XELO has no DIO´s) 4. Watchdog: Set the countdown time of system reboot when timeout happens.
  • Page 32: Observer (Cpu Gx-415Ga / I5-4300U)

    Shows information about the current system voltages. 3. Temperature and Fan Speed Shows information about the temperature and fan speed. Copyright / © Christ Electronic Systems GmbH 32 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 33: Observer (Cpu I5-6300U)

    Shows information about the current system voltage, temperature and fan speed. 3. Settings Watch the hardware monitor and log the out of range values. Copyright / © Christ Electronic Systems GmbH 33 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 34: Touch Calibration

    Foil-/Glass-Touch analog resistive 1. Click on [Start] [All Programs] [Pen Mount Universal Driver] [Pen Mount Control Panel] 2. Click on [Pen Mount 6000 USB] Copyright / © Christ Electronic Systems GmbH 34 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 35 Once calibration is carried out, the calibrated value is saved. Since the calibrated value is read from the setting file at the time of the next start up, there is no need to carry out calibration again. Copyright / © Christ Electronic Systems GmbH 35 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 36: Interfaces

    To improve the low-impedance connection you have to connect earth additional to the Grounding Bolt. Copyright / © Christ Electronic Systems GmbH 36 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 37: Usb 2.0 Type A Connector

    SuperSpeed transmitter differential pair GND_DRAIN Ground for signal return StdA_SSTX- SuperSpeed receiver differential pair StdA_SSTX+ SuperSpeed receiver differential pair Copyright / © Christ Electronic Systems GmbH 37 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 38: Usb 3.1 Type C Connector

    Ring Indicator n.c. n.c. INFORMATION! RS-485 / RS- 422 only with CPU GX-415GA and i5-4300U Copyright / © Christ Electronic Systems GmbH 38 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 39: Com Connector (Cpu I5-6300U)

    Description Transmit Data+ Transmit Data - Receive Data + Bidirectional+ Bidirectional- Receive Data - Bidirectional+ Bidirectional- Copyright / © Christ Electronic Systems GmbH 39 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 40: Vga Connector

    5.11 DisplayPort Connector Type DisplayPort Connector The DisplayPort interface is equal with the standard DisplayPort pin assignment. Copyright / © Christ Electronic Systems GmbH 40 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 41: Line In / Line Out

    Phoenix Connector Connector DFMC 1,5/19-ST-3,5-LR The Pinout is device specific. Please see the specific datasheet for more information. Copyright / © Christ Electronic Systems GmbH 41 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 42: Pointers

    INFORMATION! Displays may contain defect pixels from the manufacturing process. These lacks aren´t reasons for a warranty. Copyright / © Christ Electronic Systems GmbH 42 / 47 March 2017, Revision 17 a member of the Christ Company Group...
  • Page 43: Safety Pointers

    DANGER! In the case of damage of the device, shut it down and disconnect it im- mediately from the supply voltage. Disconnect every connection line and send it back to Christ Electronic Sys- tems GmbH. DANGER! Avoid any penetration of liquid or dust.
  • Page 44 Operating Instructions CAUTION! If the device is used for other purposes or incorrectly operated, Christ Electronic Systems GmbH will not hold damages liable. Do not operate the touch-sensitive surface of the screen with any abrasive or sharp-edged objects. Protect the Touch-it Panel PC against caustic chemicals and long solar radiation.
  • Page 45: Fcc Conformity (Only Devices With Fcc Compliance)

    CAUTION! Technological changes to the device may cause the loss of the FCC Conformity. Copyright / © Christ Electronic Systems GmbH 45 / 47 March 2017, Revision 17 a member of the Christ Company Group Document No.: E461201...
  • Page 46: Maintenance Plan

    Touch-it XELO Operating Instructions 6.5 Maintenance plan INFORMATION! Only the manufacturer (Christ Electronic Systems GmbH) is allowed to re- place the internal lithium battery. The calibration of the analog resistive touch may be required from time to time. 6.6 Repairs DANGER! Only the qualified staffs are allowed to carry out the repairs.
  • Page 47 Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. Copyright / © Christ Electronic Systems GmbH 47 / 47...

Table of Contents