Factory Reset - Dahua Technology VTH2421F Series User Manual

Step 4 Add VTO or fence station.
● Add main VTO.
1. Enter the main VTO name, VTO IP address, username and password.
2. Turn on Enable Status.
● Add sub VTO or fence station.
1. Enter the sub VTO or fence Station name, IP address, username and password.
2. Turn on Enable Status.

3.7.5 Factory Reset

Background Information
All parameters of the device will be restored to default values.
IP address and data in the SD card will not be restored.
Procedure
Step 1 Select Setting > Project Setting.
Step 2 Enter the password you set during initialization, and tap OK.
Step 3 Tap Factory Reset.
Step 4 Tap OK.
The device restarts and proceeds to initialization.
Figure 3-54 VTO configuration
User Name and Password must be consistent with the web interface login
username and password of the VTO.
Tap / to turn page and add more sub VTO or fence stations.
80