Vth Configuration; Initialization (Quick Configuration) - Dahua Technology VTH2421F Series User Manual

Parameter
First Name
Last Name
Nick Name
Room No.
Register Password
Register Type
Step 4 Click OK.
Step 5 Repeat Step2 to Step4 to add other VTHs.

2.3 VTH Configuration

The first-time configuration function is only available for VTHs that have not been initialized. If your
VTH has been initialized and you want to use this function, you need to go to Settings > Project
Settings > Factory Reset to factory reset your VTH first.

2.3.1 Initialization (Quick Configuration)

Procedure
Step 1 Select a region and language.
Table 2-4 Parameters of adding a VTH
Description
Information to distinguish each device.
● VTH number consists of 1–6 numbers, which may include number
and #. It must be consistent with room number configured at the
VTH.
● When there are main VTH and extensions, to use group call
function, the main VTH number must end with #0, and the
extension VTH number must end with #1, #2 and #3. For example, if
the main VTH is 101#0, extension VTHs must be 101#1, 101#2...
Keep it default.
22