Environmental Protection Measures - Ecolab EcoPro-ES-00510X-PFC-00S-1S-S0 Operating Instructions Manual

Dynamic pump
Hide thumbs Also See for EcoPro-ES-00510X-PFC-00S-1S-S0:
Table of Contents

Advertisement

If you are not sure you have a current version of the safety data sheet, please contact
your Ecolab consultant. He/she will be glad to assist you in ensuring that the measures for
safeguarding health in the workplace are guaranteed.
DANGER!
The safety data sheets must be displayed close to the instrument or close to
the supply containers so that the relevant countermeasures can be initiated in
the event of an accident.
Hazard arising from automatic start-up
DANGER!
Automatic start-up poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply is
connected with no need to press a switch/button beforehand.
DANGER!
Danger of automatic start of the pump
The the pump is automatically started by connecting the power supply already,
without having to press a switch / button before.
For security reasons the [auto start] function is not activated when the
pump is delivered.
Hazards caused by pressurised components
DANGER!
Danger of injury from pressurised components!
With improper handling, pressurised components can move uncontrollably and
cause severe injuries. Liquid under high pressure can escape from pressurised
components if handled improperly or in the case of a defect. This can lead to
severe or fatal injuries.
– Establish a pressure-free state.
– Discharge any residual energy.
– Make sure that liquids cannot discharge accidentally.
– Immediately call in qualified staff to replace defective components which
are pressurised during operation.
2.7.3

Environmental protection measures

ENVIRONMENT!
The environmental symbol denotes environmental protection measures.
19
Safety
417102264 Rev. 5-01.2019

Advertisement

Table of Contents
loading

Table of Contents