Advertisement
4.3 Installation Guide
Step 1. Install the Strike Hole Cover[E] and Strike Plate[D] with 2
Wooden Screws[I]. (Your original Strike Hole Cover and Strike
Plate could be kept if it is compatible with the latch)
Step 2. Install the Lock Latch[C] (Latch can be adjusted between
2-3/8"(60mm) and 2-3/4"(70mm), make sure the spindle hole is
squarely straight), then fix the Lock Latch with 2 Wooden Screws[I].
Step 3. Install the Front Handle[A]. Tighten and Fix the 2 Connecting
Pipes[G]. Then route the Battery Cable through the Square Spindle
[F], insert the Battery Cable and Square Spindle into the Lock Latch
hole, and then fix the Front Handle.
Step 4. Install the Rear Handle[B]. Unscrew the Battery Cover
Screw[K] on the Back Handle to open the battery cover, then route
the Battery Cable through the Back Handle, Fix the Back Handle
with 2 M4 Screws[J].
5
Hide quick links:
Advertisement
