Advertisement
This manual contains information concerning the adjustment and maintenance of your New Holland T7.220,
T7.235, T7.250, T260, Tractor. You have purchased a dependable machine, but only by proper care and
operation can you expect to receive the performance and long service built into this tractor. Please have all
operators read this manual carefully and keep it available for ready reference.
This machine was designed to power and propel itself. It is intended to load and move materials with a variety
of buckets and forks. Allied attachments built and supplied by other manufacturers can be used on the tractor
where recommended and approved by New Holland.
DO NOT use this machine for any purpose or in any manner other than as described in this manual, decals, or
other product safety information provided with this machine. These materials define the machine's intended use.
All persons who will be operating this machine shall possess a valid local vehicle operating permit and/or other
applicable local age work permits.
Your New Holland dealer will instruct you in the general operation of your tractor. (Refer to the "Delivery Report"
at the back of this manual.) Your dealer's staff of factory-trained service technicians will be glad to answer any
questions that may arise regarding the operation of your tractor.
Your New Holland dealer carries a complete line of genuine New Holland service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement
parts. Be prepared to give your dealer the model and PIN number of the engine and tractor, when ordering parts.
Locate these numbers now and record them below. Refer to the "General Information" section of this manual
for the location of the model and PIN numbers of your tractor.
Model
PIN Number
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements
or changes when it becomes practical and possible to do so, without incurring any obligation to make changes
or additions to the equipment sold previously.
TO THE OWNER
Engine Model
Engine Serial Number
IMPROVEMENTS
Advertisement
