Table of Contents
Advertisement
PD32/PD30 Mains Power Distributor
en 8
When the rack is connected to onsite mains power supply, the three main indicators display the
presence of the onsite mains supply lines (phase conductors L1,L2,L3 on PD32-EU, X,Y,Z on PD30-
US).
FIG2: Mains Voltage indicator LEDS (shown is PD32-EU)
4. Mains Outputs – Amplifiers
®
Both PD30-US and PD32-EU have three power lines that are terminated with a 32A powerCON
(NAC3FC-HC) mains power connector. They appear on the rear panel and should be connected to the
three amplifiers.
Because there is no built-in circuit breaker, the amplifiers will be connected to mains power as soon as
the mains power connector is put on the mains power distributor.
FIG3: Rear view of PD30/PD32- two auxiliary outlets and three 32A mains lines
5. Auxiliary Mains Outputs
The PD30-US, PD32-EU also feature three auxiliary mains outputs- on per phase. They are intended
for the connection of low current devices such as notebooks, or Ethernet switches.
They have 230 V~ / 16 A (PD32-EU), respect. 120 V~/ 15 A (PD30-US) circuit breaker on the front
panel. They are labeled:
PD32-EU: L1-16 A, L2-16 A, L3-16 A
PD30-US: X-15 A, Y-15 A, Z-15 A
Bosch Security Systems Inc.
2018.08 ∣ 00 ∣ F.01U.346.535
Advertisement
Table of Contents
