Mains In - Dynacord PD32-EU User Manual

Mains power distributer
Table of Contents

Advertisement

PD32/PD30 Mains Power Distributor

3. Mains In

PD30-US is designed for a mains supply network configuration of:
30 A 3øY 120/208 V~ VAC ~ 60 Hz
It has a NEMA 30A 3øY 120/208V VAC male connector that accepts the corresponding NEMA female
connector.
PD32-EU is designed for a mains supply network configuration of:
3-phase, 230/400 V~ -50/60 Hz – 32 A
It has a 32A CEE (Cekon) male connector that accepts the corresponding CEE female connector.
NOTICE! T
he main power distributor device has no built-in circuit breaker for the three
amplifier mains power lines. Protection is only provided by the onsite mains power sub-distribution.
DANGER! Potential Risk of electric shock!
The mains power distributor is a protective class 1 unit. A missing earth (ground) contact may cause
dangerous voltages in the housing and controls and may lead to electric shock.
Do not connect the NEMA/CEE mains connector under load or live!
Ensure the mains connector is accessible at any time to disconnect the unit in case of
malfunction or danger!
Connect the unit to mains power supplies with protective earth only!
If there's any sign of obvious damage to the power cord and/or mains connector, do not use
the unit and replace it before further use!
Bosch Security Systems Inc.
.
max
en 7
2018.08 ∣ 00 ∣ F.01U.346.535

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pd30-us

Table of Contents