Table of Contents
Advertisement
PD32/PD30 Mains Power Distributor
en 4
7. Do not cover any ventilation slots. Always refer to the manufacturer's instructions when placing the
device.
8. Do not place the device close to heaters, ovens, or other heat sources.
9. Note: The device must only be operated via the mains power supply with a safety ground connector.
Do not disable the safety ground connection function of the supplied power cable. If the plug of the
supplied cable does not fit your mains socket, please contact your electrician.
10. Ensure that it is not possible to stand on the mains cable. Take precautions to ensure the mains
cable cannot become crushed, particularly near the device connector and mains plug.
11. Only use accessories/extensions for the device that have been approved by the manufacturer.
12. Unplug the device if there is risk of lightning strike or in the event of long periods of inactivity.
However, this does not apply if the device is to be used as part of an evacuation system!
13. Have all service work and repairs performed by a trained customer service technician only. Service
work must be carried out immediately following any damage such as damage to the mains cable or
plug, if fluid or any object enters the device, if the device has been used in rain or become wet, or if
the device has been dropped or no longer works correctly.
14. Please ensure that no dripping water or spray can penetrate the inside of the device. Do not place
any objects filled with fluids, such as vases or drinking vessels, on top of the device.
15. To ensure the device is completely free of voltage, unplug the device from the power supply.
16. When installing the device, ensure that the plug is freely accessible.
17. Do not place any sources of open flame, such as lit candles, on top of the device.
18. This PROTECTION CLASS I device must be connected to a MAINS socket with a safety ground
connection.
Caution!
Use only manufacturer-approved carts, stands, brackets, or tables that you acquired together with the
device. When using carts to move the device, make sure the transported equipment and the cart itself
cannot tip over or cause injury or material damage.
IMPORTANT SERVICE INFORMATION
Caution!
This service information is for use by qualified service personnel only. To avoid the risk of electric
shock, do not perform any maintenance work that is not described in the operating instructions unless
you are qualified to do so. Have all service work and repairs performed by a trained customer service
technician.
1. Repair work on the device must comply with the safety standards specified in EN 60065 (VDE
0860).
2. A mains isolating transformer must be used during any work for which the opened device is
connected to and operated with mains voltage.
Bosch Security Systems Inc.
2018.08 ∣ 00 ∣ F.01U.346.535
Advertisement
Table of Contents
