Panasonic CT-27SX11E Service Manual page 22

Press the Power Button on the Remote Control to select the Service Adjustment
For Adjustments:
1.Press Channel Up/Down on the
Remote Control to select one of
the available Service Adjustments
(a in Fig. 20).
CH
CH
Note: Some adjustment modes may not be
available in some formats.
Note: Write Down the original
value set (b in Fig. 20 ) for
each address
modifying anything. It is
easy to erroneously adjust
the wrong item.
Geometry Adjustments
D00 H POSITION
D01 V SIZE
D02 V S CORRECTION
D03 V LIN CORRECTION
D04 E/W TRAPEZIUM
D05 V AGC
D06 V POSITION
D07 V CENTERING
D08 V CENTERING DAC SW
D09 V-BLK START
D0A V-BLK STOP
D0B EW CORNER
D0C EW PARABOLA
D0D H WIDTH
D0E OSD POSITION
MTS Adjustment
M00 INPUT LEVEL
M01 LOW-LEVEL SEPARATION
M02 HIGH-LEVEL SEPARATION
IMPORTANT NOTE:
Always Exit the Service Mode
Following Adjustments.
- 22 -
2.Press Volume Up/Down on the
Remote Control to adjust the
before level of the selected Service
Adjustment (b in Fig. 20).
Default
Level
13
37
5
8
9
1
0
100
1
12
14
3
13
26
65
Default
Level
33
6
25
To P Items.
CH
CH
PW
PW