Location and Function of Parts
BKPF-102CB Connector Panel
D1 DAC
SDI IN
1 SDI IN connector
2 Active-through output connectors
ANALOG OUT
Y/G
3 ANALOG OUT connectors
B-Y/B
R-Y/R
SYNC
4 SYNC connector
BKPF-102CB
1 SDI IN (serial digital signal output) connector
(BNC type)
Accepts a 4:2:2 component serial digital video signal.
2 Active-through output connectors (BNC type)
Output the signal supplied to the SDI IN connector
after its waveform has been shaped.
The four connectors output the same signal.
3 ANALOG OUT (analog signal output)
connectors (BNC type)
Output analog component video signals converted
from the signal supplied to the SDI IN connector.
The format and level for the output signal are selected
with the switches on the board.
4 SYNC (sync signal output) connector (BNC
type)
Outputs a sync signal.
6 (E)