Advertisement
5. OPERATION
5.1.
Pass cable over pressure cap (5).
5.2.
Assemble the neoprene collar (4) with a compression disc (3) either side.
5.3.
Press the cable end into the slots in items 4 and 3 and press the complete arrangement into the base of the body.
5.4.
Firmly screw on the pressure cap (5) to ensure a good grip of neoprene collar (4) onto the cable.
5.5.
Unscrew ram (2) and endcap (6) fully and remove from body (1). Fill the chamber to within 20mm from its end with the required
lubricant and replace end cap.
5.6.
Screw the ram down until lubricant is forced fully through the cable housing.
5.7.
Before removing cable, unscrew the end cap (6) and drain off surplus lubricant.
6
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1
2
01284 703534
Original Language Version
3
5
4
sales@sealey.co.uk
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
MS0381
Issue 1
06/09/22
Advertisement
