Table of Contents
Advertisement
20 Chapter 1 TunnelGuard
Change deafult JRE
Property NN_JREPATH can be used to set the JRE path. If NN_JREPATH is set,
the "Select JVM" dialog box is not shown. JVM represented by NN_JREPATH is
used.
In silent mode, if NN_JREPATH is provided, the corresponding JRE is used. If
NN_JREPATH is not provided for a VM kit, the default bundled JRE is installed
and used. If NN_JREPATH is not provided for a NoVM kit in silent mode, the
installation fails.
Change TunnelGuard icon
The TunnelGuard agent displays an icon in the Windows system tray. The icon
indicates TunnelGuard status. This icon also appears in the About dialog box of
the TunnelGuard agent.
To change the icons for the TunnelGuard agent,
•
To change the icons for the TunnelGuard agent, use the following naming
conventions:
•
•
•
•
•
Modify Agent.properties
The Agent.properties file has settings for how the TunnelGuard agent runs.
Administrators can customize it and include it in the custom installation.
To change Agent.properties, do the following:
1
NN47230-501 (324108-A)
Modify the MSI files to replace the files under
[INSTALLDIR]\resources\*.ico with these icon files. [*]
iconGray.ico: TunnelGuard inactive; normally gray
iconNormal.ico: TunnelGuard user compliant; normally green
iconError.ico: TunnelGuard user compliant; normally red
iconActive.ico: TunnelGuard system compliant; normally blue
iconWarning.ico: TunnelGuard system compliant; normally blue with red X
Do an installation or extract the Agent.properties from MSI.
Advertisement
Table of Contents
