Nortel Ethernet Routing Switch 2500 Series; Nn47215-505 (323165-B) 02.01 Standard - Nortel 2526T Configuration

40 Configuring Security using the CLI
The show ipmgr command is executed in the Privileged EXEC command
mode.
The show ipmgr command has no parameters or variables.
Figure 2 "show ipmgr command output" (page 40)
from the show ipmgr command.
Figure 2
show ipmgr command output
ipmgr command for management system
The ipmgr command for the management systems enables the IP manager
list for Telnet, SNMP, or HTTP access. The syntax for the ipmgr command
for the management systems is:
ipmgr {telnet|snmp|web} [source-ip <1-10> <XXX.XXX.XXX.XXX>
[mask <XXX.XXX.XXX.XXX>]]
The ipmgr command for the management systems is executed in the
Global Configuration command mode.
Table 3 "ipmgr command for system management parameters and variables"
(page 40)
Table 3
ipmgr command for system management parameters and variables
Parameters and
variables
telnet|snmp|web
Copyright © 2007, Nortel Networks
.
describes the parameters and variables for the ipmgr command.
Description
Enables IP manager list checking for access to
various management systems:
•

Nortel Ethernet Routing Switch 2500 Series

Security — Configuration and Management

NN47215-505 (323165-B) 02.01 Standard

4.1 19 November 2007
displays sample output
telnet— provides list access using Telnet
access