Tuff Tonneaus Colorado Dual Cab with Headboard 250 Fitting Instruction

Table of Contents

Download this manual

TONNEAU FITTING INSTRUCTION

Colorado Dual Cab with Headboard

Package includes

 1 X Tonneau Cover

 1 x Tonneau Support Bar

 1 x Support Bar Sheath

 1 x Fitting Instructions

2003 – July 2012

Part number: 250

 2 x Bar Brackets

 25 x Rivets

 1 x Lock Bracket

 18 x Rope Buttons

 18 x Anti Abrasive Discs

Table of Contents

Need help?

Do you have a question about the Colorado Dual Cab with Headboard 250 and is the answer not in the manual?

Page 1 TONNEAU FITTING INSTRUCTION Colorado Dual Cab with Headboard 2003 – July 2012 Part number: 250 Package includes  1 X Tonneau Cover  2 x Bar Brackets  1 x Tonneau Support Bar  25 x Rivets  1 x Support Bar Sheath ...
Page 2 1. TONNEAU COVER FITTING NOTE Read entire instructions prior to start. 1.1 BASIC TOOL REQUIRED Drill, 4mm Drill Bit, Rivet Gun, Marking Pencil / Pen 1.2 TONNEAU COVER INSTALLATION PROCEDURE 1. With a pencil mark the inside edge on each side of the tub at 650mm from the inside front face of tub towards the rear on each side.
Page 3 2. TONNO LOCK The Tonno Lock is now a standard feature included with all Tuff Tonneaus. The Tonno Lock is situated at the front of the tonneau cover, so as not to impede the accessibility of the Tuff Tonneau.
Page 4 3. MULTI-FIT SUPPORT BAR The Tuff Tonneau Multi - Fit Support Bar is designed to fit almost all Utes on the Market, from Suburu Brumbys to Cab Chassis aluminium trays. 3.1 BASIC TOOL REQUIRED Drill, 4mm drill bit 3.2 MULTI-FIT SUPPORT BAR CONTENTS 1 x hollow bar centrepiece 2 x grub screws 2 x solid bar end piece...
Page 5 4. WARRANTY AND FEEDBACK Please register your warranty details online at: QR Code: Website Link http://www.tto.com.au/en-au/warranty.html Please complete our 2 minute feedback section as we strive to constantly improve for our customers Your Tuff Tonneau is now ready for work.

250