Table of Contents
Advertisement
3. USB Output Function
AC 230V 500W MAX
4. DC Output Function
A. Press the DC button to enter DC mode, DC/CAR port will be available.
B. These two DC5521 (5.5mm in diameter) 12V port o er max 10A output current and
automatically distribute max current.
C. The DC5521 port is connected in parallel with the car charger port (the total output power
requirement does not exceed 120W).
Notes:
When the products AC, DC, UBS output at full power for 3 minutes at the same time, the product
buzzer will alarm, and the LCD screen will display E10 code, if the alarm persists for more than
30 seconds and is not cleared. The product will forcibly turn o the DC output to reduce the
total output of the product output power to ensure product safety. If the DC output shuts down
due to overload, do not force it by pressing the key open. When the remaining charge of the
machine is less than 10%, the DC output function will be forcibly turned o , and it needs to be
charged to restore. If idle for more than 4 hours, the DC output will automatically shut down.
When not in use, please press the DC button to turn o the DC function.
Protection mode (DC Output)
Short circuit protection: when short-circuit occurs with external devices, the machine
starts beeping and stops output.
A. Press the USB button to enter USB mode,
UBS-A/UBS-C PD60W port will be available.
When two UBS-A ports are used simultaneously,
the two ports can only output 5V/3.8A in total.
DC Output 12V
10A
5
AC 230V 500W MAX
Advertisement
Table of Contents
