Table of Contents
Advertisement
3. Charge Through AC Adapter
Plug the original adapter into the machine's
DC input port and you will see the battery
indicators blink on the screen.
Notes:
A. The product is fully charged when all battery indicators stop blinking and remain solid.
After the product is fully charged, please unplug the AC wall charger in time.
B. Usually, it takes around 7 hours to fully charge the machine using the AC power adapter.
C. When you charge the battery using the DC input port the PD100W port will not provide
power output.
4. Charge Through Your Car
A. Plug the orginal car charger into the cigarette lighter socket of your 12V car, and then plug
into the DC input port of the machine.
B. The original car charger features a 10A protector tube to protect your car.
C. You will know the machine is being charged when the battery indicators blink.
D. Depending on your car you may not get a full charge with this method of charging.
E. If the charging voltage of your car is too low, the battery can't be charged using this method.
Notes:
To avoid car battery power loss, you should charge this product through your car cigarette lighter
only when your car engine is started. This function is for a 12V car only.
Protection mode (DC Input)
A. Due to the di erent models of your car, it may not be full.
B. Undervoltage protection: The power generator can't be charged if the voltage of your car is too low.
AC Adapter
3
AC 230V 500W MAX
AC 230V 500W MAX
Advertisement
Table of Contents
