Riello RS 28/M Installation, Use And Maintenance Instructions
Lpg kit
Hide thumbs
Also See for RS 28/M:
- Installation, use and maintenance instructions (48 pages) ,
- Installation, use and maintenance instructions (24 pages) ,
- Installation, use and maintenance instructions (22 pages)
Related Manuals for Riello RS 28/M
Summary of Contents for Riello RS 28/M
- Page 1 Installation, use and maintenance instructions LPG Kit CODE MODEL 3010270 RS 28/M-/E-/EV 3010271 RS 38/M-/E-/EV 3010272 RS 50/M-/E-/EV 2915800 (1) - 03/2022...
- Page 2 Original instructions...
-
Page 3: General Warnings
General warnings General warnings Guarantee and responsibility The rights to the guarantee and the responsibility will no longer be – Personnel must always use the personal protective equipment valid in the event of damage to things or injury to people, if such envisaged by legislation and follow the indications given in this damage/injury was due to any of the following causes: manual. -
Page 4: Kit Description
LPG kit LPG kit Kit description The kit allows the burners, to operate on LPG. The kit is composed of: Before starting the kit installation operations, get a suitable lifting system ready. Description Quantity Gas distributor Disc Be careful as some drops of fuel may leak out dur- Self-adhesive label ing the kit installation phase. -
Page 5: Electrical Wiring
LPG kit Combustion head setting Gas pressure - output Pressure measured at the coupling with combustion chamber at Air setting: screw 1)(Fig. 2 - A): unchanged 0 “WC (Tab. C). Gas setting: disc 1) (Fig. 2 - B): always set on 0. If the combustion chamber is pressurized, the required gas-pres- sure is that shown on the table plus the pressurization value. - Page 8 Subject to modifications...