Siemens SIMATIC NET SFP Series Operating Instructions Manual page 22

Uninstalling
5.2 Removing an SCP / STP transceiver
Procedure
Figure 5-1
Follow the steps below to remove an SCP / STP transceiver:
1. Remove the connecting cable of the SCP / STP transceiver.
2. Press the spring in the SCP / STP slot to the right using a screwdriver, see figure.
The SCP / STP transceiver is pushed part of the way out of the SCP / STP slot.
3. Remove the SCP / STP transceiver from the SCP / STP slot.
Note
Do not use force
It must be possible to remove the SCP / STP transceiver easily and without applying any
force.
4. Close the SCP / STP transceiver with a sealing plug.
22
Removing an SCP / STP transceiver
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 11/2015, A5E02630804-08