Mount Door Speaker - DLS CRUISE CRPP-VO1.6CX User Manual

SCREWS
Speakers fixed with screws. Make sure to use
correct tools to unscrew. Save the screws for
reattachment.
Mounting door speakers
RIVETS (Mounting new speakers)
If the speakers were fixed with rivets. DLS
recommends using a rivet tool to fix the new DLS
speakers. (Not included in CRPP-VO1.6CX)
Place the new DLS driver in the hole for the
speaker. Use a rivet tool and rivets to safely mount
the driver. (Step 3 might be done several times)
SCREWS (Mounting new speakers)
If the speakers were fixed with screws. DLS
recommends using the OEM screws to fix the new
DLS speakers. Use the correct screw bit.
Place the new DLS driver in the hole for the
speaker and use the screws to fix the speaker.
Connect the speaker harness. Start the assembly
of the door panel. Reconnect all wires harness.
Connect all plugs to the door cover, reconnect the
unlocking device, place the door cover from the top,
by the window seal and push it gently down.
Make sure the clips are in place and can engage.
Give the door panel a push by the hand to attach to
the clips. Mount and fasten all screws to the correct
places. Remember to put the door locking knob
back.
4