CRPP-VO1.6CX Content Welcome to DLS! Welcome Thank you for buying a DLS Cruise CRPP-VO1.6CX. For Pre installation us, it’s all about the sound experience. We care deeply about sound and construction quality. In order for your experience to be as optimal as possible, it is important that...
The DLS CRPP-VO1.6CX can be installed instead panel. Always use plastic PRY tools when of DLS CRPP-VO1.6 but the OEM tweeter will in removing panels and interior, to avoid marks on this case, still be connected. The sound the panels and leather.
There are several electric and mechanical Depending on car model, the amount of screws and placement can vary. In most cases the connectors on the backside of the door panel. screws used are Torx T25. Release the door lock cable. Disconnect all cables for lightning, speaker cable harness and any other connections.
OEM screws to fix the new reattachment. DLS speakers. Use the correct screw bit. Place the new DLS driver in the hole for the speaker and use the screws to fix the speaker. Mounting door speakers RIVETS (Mounting new speakers) Connect the speaker harness.
For technical assistance, ask your car audio dealer where the product was sold or the distributor in your country. You can always contact the DLS Helpdesk in Sweden at e-mail: info@dls.se. Information can also be found on our WEB- site www.dls.se. We follow a policy of continuous advancement in development. For this reason, all or part of the...
Specifications Art. no CK-CRPP-VO1.6CX DLS Cruise CRPP-VO1.6CX Tweeter Woofer 6.5” / 165 mm with glass fiber cone Technical Specification: Tweeter 1” / 25 mm silk dome tweeter with accessories Size 1” / 25.4 mm RMS Power 90 W Voice Coil Material...
DLS Cruise CRPP-VO1.6CX The DLS coaxial speaker is developed to be installed in the back door of your car. However, you can mount in the front door even if an OEM component kit is installed in your car. The tweeter level will CRPP-VO1.6CX...
European Economic Area (EEA). DLS products complies with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste.