Table of Contents
Advertisement
Included products:
2pcs Coaxial speakers
Included in box:
4pcs Adhesive foams for wrapping
4pcs Terminal crimp connectors
8pcs Blind rivets
1pc Pry tool
1pc Manual
Pre installation
Disconnect Battery
Before you start the process
of replacing speakers,
disconnect and secure the
negative terminal from your
battery/power source. This
will prevent the risk of
damaging yourself or the
products.
Place the disconnected terminal in a secure and
isolated location away from any possible
connection belonging to the battery/power source
system.
General info
Some sound systems may vary in size of the door
speaker. Make sure that your vehicle has the
same size as this coaxial speaker, before you
start the assembly
This is a generic mounting instruction. The
approach is similar to all of the described car
models. Some screws and clips may be placed
differently and depending on your car model.
The DLS CRPP-VO1.6CX can be installed instead
of DLS CRPP-VO1.6 but the OEM tweeter will in
this case, still be connected. The sound
improvement will not be as good as with the
CRPP-VO1.6
Installation
Dismount door panel
Dismount the front door by removing the cover
of the door panel.
Hint: Use plastic PRY tools to avoid marks on
the panels or damaging the plastic clips.
If your door has a corner cover (1) or a tweeter
cover (2), you need to remove them first.
Corner cover is attached with 2 clips and the
tweeter cover is usually attached with 2 or 3
clips.
Remove the door lock knob before removing
the door panel.
Remove the electric window panel and
disconnect the plug on the back side of the
panel. Always use plastic PRY tools when
removing panels and interior, to avoid marks on
the panels and leather.
2
Advertisement
Table of Contents
