Cleaning And Maintenance - techni vorm MOCCAMASTER Cup-one Original Instructions For Use

Table of Contents

Advertisement

Available languages

Available languages

CLEANING &
MAINTENANCE
Basic Cleaning
• Before cleaning, remove plug from the socket!
• Clean the brewer regularly on the outside with a moist cloth and wipe
dry. After each use, hand wash the filter holder with mild detergent.
• Make sure no coffee grounds are left in the filter holder, as they
might clog the filter holder during next usage.
• Use the provided small brush to clean the opening in the bottom
of the filter holder.
will
• Do not submerge brewer in any liquid
Cleaning the brewer (inside).
• The brewer needs to be cleaned regularly.
• If used daily it needs to be cleaned every two weeks.
• Use only the "Clean Drop cleaning aid" available at your Moccamaster
of
dealer and in our web shop at www.moccamaster.com.
• Follow the instructions given on the ''Clean Drop cleaning aid" bag /
box.
Descaling Your Brewer
• Your coffee maker must be descaled regularly to maintain optimal
performance.
er.
• When mineral deposits build up in the heating element of your Tech-
ra-
nivorm Moccamaster, it can clog the water flow and affect the brew
temperature and saturation time. If not descaled regularly, the brewer
can stop working
• Technivorm Moccamaster recommends descaling your brewer every
80 cycles (easily remembered after every box of 80 count filters) or a
minimum of every 3 months.
• Use dedicated de-scaling products available at your Moccamaster
dealer and in our web shop at www.moccamaster.com.
• (or 150 ml. water + 150 ml. acetic acid)
• Fill the water tank with the descaling solution according to the directi-
r
ons on the package or 50% water and 50% household vinegar.
• Switch on the unit and wait until the liquid in the tank is completely
nd
empty.
• Repeat the process two to three times with clean water to clean the
e
device.
Anti-Frost Protection and Extended Storage Guidelines.
• Turn the brewer off and remove the electrical plug from outlet.
ith
• Remove outlet pipe, pull it carefully out of the rubber gasket.
• Empty any remaining water within brewer by holding it upside down
over the sink.
• Replace the outlet pipe before using the brewer again,
• insert smoothly in the gasket at top of the cold water reservoir.
21

Advertisement

Table of Contents
loading

Table of Contents