Advertisement
Install the application SnsVision© from GooglePlay to an Android device if it is
not installed.
Wired connection:
a. Connect Wi-Fi R-Box via USB-OTG cable, turn On Wi-Fi R-Box (switch-on
indicator should be lit);
b. Launch snsvision© App SnsVision©.
IMPORTANT: In the case of a wired connection, the Android control device
Wireless connection:
a. Torn On Wi-Fi module on Android control device;
b. Connect the Android control device to Wi-Fi network R-Box;
c.
Make sure you have the required permissions are allowed. To do this, go
to the section «Apps» in device settings → find and select an application
snsvision© –> in the «Permissions» subsection, enable all required
permissions;
d. Launch the SnsVision© App.
IMPORTANT: Starting with Android version 9 and higher, to work snsvision©
App with the device via Wi-Fi, it is necessary enable «Geolocation»; Starting
with Android version 6, permissions are needed to be set each time, when
Wi-Fi R-Box connection
must support USB-OTG or USB-Host function.
snsvision installing or App update.
5
Advertisement
