Sense New Vision SNS 1t NV Quick Manual page 2

1. Turn ON Receiver by pushing and holding Power button
and turning ON the screen.
2. Put AA battery into transmitter, close the cap and wait for appearing data
on the screen.
3. Put the transmitter into the drill head (use adapter if needed) with orienting
on "12 o`clock" position. Put drill head in 3 meters from left (right) side of
the Receiver like on the picture below.
4. Press and hold
press button until 3.00 m numbers will appear. Unleash both buttons.
5. CALIBRATION IS DONE
Preparations
3m calibration
button to start calibration process. Keep holding
2
until sound signal
button