Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sense Manuals
  4. Transmitter
  5. New Vision SNS 1t NV
  6. Quick manual

Sense New Vision SNS 1t NV Quick Manual

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
SNS 1t NV
•
transmitter SNS MSt2;
•
adapter for transmitter;
•
receiver SNS 1t;
•
Locating system
Quick manual
manual;
22/14 Oktyabr`skaya str. Ulyanovsk. Russia.
+7 (8422) 45-72-00, info@sense-inc.ru, www.sense-hdd.ru
Equipment:
•
receiver Li-Ion battery with
•
WiFi R-Box;
•
SNS 1t bag;
power cable.

Advertisement

loading

Related Manuals for Sense New Vision SNS 1t NV

Summary of Contents for Sense New Vision SNS 1t NV

  • Page 1 Quick manual Equipment: • transmitter SNS MSt2; • WiFi R-Box; • adapter for transmitter; • SNS 1t bag; • receiver SNS 1t; • receiver Li-Ion battery with • manual; power cable. 22/14 Oktyabr`skaya str. Ulyanovsk. Russia. +7 (8422) 45-72-00, info@sense-inc.ru, www.sense-hdd.ru...
  • Page 2 Preparations Turn ON Receiver by pushing and holding Power button until sound signal and turning ON the screen. 2. Put AA battery into transmitter, close the cap and wait for appearing data on the screen. 3. Put the transmitter into the drill head (use adapter if needed) with orienting on “12 o`clock”...

  • Page 3: Navigation Buttons

    6. Clock position correction – correction clock face position of the drill head on the screen. To make it – turn ON Receiver and transmitter, put drill head with the transmitter in needed clock position, press and hold button and then press button to confirm. New correction can be done after canceling previous one.
  • Page 4 WIFI R-Box Hardware and software complex Wi-Fi R-Box is designed for duplication information from the Receiver to control device with OS Android version 4.4 and higher. 1. Device ON/OFF button with light indicator 2. WiFi module ON/OFF button with light indicator 3.
  • Page 5 Wi-Fi R-Box connection Install the application SnsVision© from GooglePlay to an Android device if it is not installed. Wired connection: a. Connect Wi-Fi R-Box via USB-OTG cable, turn On Wi-Fi R-Box (switch-on indicator should be lit); b. Launch snsvision© App SnsVision©. IMPORTANT: In the case of a wired connection, the Android control device must support USB-OTG or USB-Host function.