Call - Nokia X2-01 User Manual

6 Scroll to a found device, and select Add.
7 Enter a passcode (up to 16 characters) on your device, and allow the connection on
the other Bluetooth device.
Operating the device in hidden mode is a safer way to avoid malicious software. Do not
accept Bluetooth connectivity from sources you do not trust. Alternatively, switch off
the Bluetooth function. This does not affect other functions of the device.
Connect your PC to the internet
You can use Bluetooth technology to connect your compatible PC to the internet. Your
device must be able to connect to the internet (network service), and your PC must
support Bluetooth technology. After connecting to the network access point (NAP)
service of the device and pairing with your PC, your device automatically opens a packet
data connection to the internet.
Packet data
General packet radio service (GPRS) is a network service that allows mobile phones to
send and receive data over an internet protocol (IP) based network.
To define how to use the service, select
data Packet data connection
>
When needed — Establish a packet data connection when needed by an application.
The connection is closed when the application is closed.
Always online — Automatically connect to a packet data network when you switch
the device on.
You can use your device as a modem by connecting it to a compatible PC using Bluetooth
technology. For details, see the Nokia Ovi Suite documentation.

Call

Select Menu Settings
>
Call divert — Divert incoming calls (network service). You may not be able to divert
calls if some call barring functions are active.
Anykey answer — Answer an incoming call when you press any key, except the power
key, the left or right selection keys, or the end key.
Automatic redial — Automatically redial the number if a call fails.
Speed dialling — Call a contact assigned to a number key (2-9) when you press and
hold the corresponding number key.
Call waiting — Set the network to notify you of an incoming call during a call in
progress (network service).
Call duration display — Display the duration of an ongoing call.
Menu
and from the following:
Call and from the following:
>
Settings Connectivity
> >
Settings 31
Packet
>