Retrieve Position Information; Trip Meter - Nokia N95 8GB User Manual

Differences in altitude are not taken into account when
calculating the distance. Route guidance is active only
when you move.
To set your trip destination, select
destination and a landmark as the destination, or
enter the latitude and longitude coordinates. Select
Stop navigation to clear the destination set for your
trip.

Retrieve position information

Press , and select Tools
data > Position.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
To save your current location as a landmark, select
Options Save position. Landmarks are saved
>
locations with more information, and they can be used
in other compatible applications and transferred
between compatible devices.

Trip meter

Press , and select Tools
data Trip distance.
>
Select Options Start
>
calculation, and Stop to deactivate it. The calculated
values remain on the display. Use this feature outdoors
to receive a better GPS signal.
Options Set
>
Connectivity GPS
> >
Connectivity GPS
> >
to activate trip distance
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start a
new calculation. Select Restart
and total time to zero.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
to set the odometer
91