Pair Devices - Nokia N80 User Manual

Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select
Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2
Select the item and
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons:
video device, and
To interrupt the search, select Stop.
82 Copyright © 2006 Nokia. All rights reserved.
Options > Send
Options > Send > Via Bluetooth.
computer, phone, audio or
other device.
3
Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See 'Pair devices', p. 82.
5
When the connection has been established,
data is shown.
The Sent folder in
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.

Pair devices

To open the paired devices view (
> Via
application main view, press
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Devices with Bluetooth wireless technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Messag. does not store messages sent
), in the
.
Options > New paired
Sending
Bluetooth
device.