Option 2: Pole Mount
1. Mount Camera Bracket
Route the power cord through the opening of the camera bracket. Mount the camera on the pole using two pole-mounting loops* (loop width ≤ 12mm).
*Pole-mounting loops are not included. Prepare the required accessories for pole mounting in advance.
2. Install Camera
Install the camera on the bracket. Use two bracket screws to affix the bracket and the camera.
*Pole-mounting loops
(not included)
3. Connect to Power
Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors.
Male Power Connector Waterproof Seal
Female Power Connector
12